Routes - Lowrance Hook Reveal X Series Operator's Manual

30
Delete a waypoint
You can delete a waypoint from the Edit Waypoint dialog or by
selecting the Delete menu option when the waypoint is activated.
The Edit Waypoint dialog is activated by positioning the cursor over
the waypoint, selecting the waypoint in the menu, and then the
delete menu option.
The Edit Waypoint dialog can also be accessed by activating the
Waypoints, Routes, Trails dialog on the tools panel on the Home
page. Select the Waypoints tab, the waypoint you want to delete
and then the delete option.
You can delete MOB waypoints the same way.
Waypoint alarm settings
You can set an alarm radius for each individual waypoint you create.
The alarm is set in the Edit Waypoint dialog.
Ú Note:
The waypoint radius alarm must be toggled ON in the
alarm dialog to activate an alarm when your vessel comes
within the defined radius. For more information, refer to "Alarms
dialog" on page 65.

Routes

A route consists of a series of routepoints entered in the order that
you want to navigate them.
Creating a new route on the page
1.
Select the new route option from the menu
2.
Press the Cursor/Waypoint key to activate the cursor on the
panel
3.
Use the Arrow keys to position the cursor at the first routepoint
on the panel
4.
Press the Menu/Enter key to create the routepoint
5.
Repeat steps 3 and 4 to continue positioning new routepoints
on the panel until the route is completed
6.
Press the Exit (X) key when completed and save the route.
Waypoints, routes, and trails
Operator Manual
| Hook Reveal X Series