Advertisement
ＨＣ-１１ＵＶ Ｐ ｒ ｏ
Operation panel
Power switch
Mode change switch
LED(green)
Inner box
UV lamp
sensor
(inside the machine)
Handle
About the UV lamp
UV lamp is lit when heating + UV mode or UV mode is selected and the door is closed.
● Checking UV lamp performance
＊
Do not stare at the light source directly.
To check if the UV lamp is lit or not, light the UV lamp while putting the magnet close to
the UV lamp sensor. At this time, look at the end of the inner box, but do not stare at the
light source. If the light does not work even after trying this operation several times, it can
be assumed that the UV lamp has burned out. In this case, consult to TAIJI sales
representative or TAIJI & CO., LTD.
Safety Device
When the temperature of the product inside exceeds the upper limits abnormally
by any means, the thermal fuse blows out the electric circuit.
When it works turn off and take off the power plug from the power outlet and
consult to TAIJI sales representative or TAIJI & CO., LTD.
Mode indication
LED(blue)
LED(orange)
Front view
Door back
Basket
Gasket
UV lamp
Drain tray
－7－
Body
Power cord
Rear view
Plug
Advertisement
