Operation; Remote Control - Prem-I-Air EH0529 Manual

•
Plug the mains lead into a 13 Amp mains socket.
•
If connecting via an extension lead, make sure that the lead is rated at 3
Amps or more, and that it is fully unwound. If any other appliances are
connected to the same extension lead, make sure that it is rated for the total
power of all appliances connected.
activate the time, press the TIMER button repeatedly until the indicator shows the
required number of hours. (Add up the times of the indicators that are illuminated
– if "4 hours" and "1 hour" are illuminated then the timer is set for 5 hours). The
fan will switch off after the selected time.
The remote control can be used to switch the fan on and off, to select the speed
and the operating mode, and to set the timer. The buttons on the remote control
handset operate exactly the same as the buttons on the control panel.
Oscillation cannot be controlled from the remote control handset.

OPERATION

•
Switch the appliance on at the mains
socket.
•
Press the ON/SPEED button on the
control panel (9) to start, then press it
again to select the speed:
•
The L M or H indictor illuminates to show
which speed is selected (Low, Medium
or High)
•
The MODE switch can be used to select
normal operation ("MODE" indicator
illuminates red) or to simulate a natural
breeze ("MODE" indicator illuminates
green)
•
It is normal for the motor to become
warm in normal use.
•
Unplug the appliance from the mains
when not in use.
•
To select oscillation, press the oscillation
contol on top of the motor housing. To
turn off oscillation, pull the oscillator
lever upwards.
The timer can be used to switch the fan off
automatically after a period of time in
increments of 30 minutes up to 7½ hours. To

REMOTE CONTROL

Page 3
TIMER