Before Use; Product Safety; Operation - Prem-I-Air EH1702 User Manual

You must inspect the product including its cable and plug for any signs of damage.
If the product is damaged, DO NOT use it, and contact your supplier immediately.

This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without
supervision.

Do not use in close proximity to gas appliances

Do not use unless correctly installed.
Do not cover when in use.

Do not place the mains lead beneath a carpet or rug.

Do not use the appliance in locations where paint, petrol or other flammable
liquids are used or stored.

Not suitable for use in boats, caravans or other similar areas.

Do no insert any object into the appliance through the grilles. This may
damage the appliance or result in overheating or electric shock.

Do not use this appliance in the immediate surroundings of a bath, a shower
or a swimming pool.

The appliance is fitted with an overload cut-out which will operate if the motor
overheats or is stalled. If this happens, disconnect from the mains supply
immediately, and allow the motor to cool down.

Plug the mains lead into a 13 Amp mains socket. If any other appliances are
connected to the same extension lead, make sure that it is rated for the total
power of all appliances connected.

If connecting via an extension lead, make sure that the lead is rated at 3 Amps
or more, and that it is fully unwound.

Switch the appliance on at the mains socket.

Use the control knob (11) to start the fan. The fan has 3
speeds and OFF.
1. Slow
2. Medium
3. Fast

The Oscillation Clutch Control (8)
head to cover a greater area. Lift to disengage, push down to engage.

To switch turn the control to 0

BEFORE USE

PRODUCT SAFETY

OPERATION

button allows the unit to oscillate the fan
4