Before Use - Prem-I-Air EH0529 Manual

These instructions should be read carefully and left with the user of the product
for future reference.
You must inspect the appliance including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your supplier
immediately.
IMPORTANT
Installer and Users please note:

BEFORE USE

• Interlock the two feet, place the lower shaft on top of the
feet, and fix with four screws.
• Slide the motor assembly onto the telescopic shaft, and
tighten the thumb screw.
• Loosen the shaft clamp screw, pull the telescopic shaft to
the required height, and re-tighten the clamp screw.
• Rotate the guard retaining nut anticlockwise to remove it
from the motor housing. Locate the rear grille on to the motor
ASSEMBLY
housing and fix in place with
the guard retaining nut.
• Place the blades on the
motor shaft, and locate the
peg on the shaft into the
recess at the back of the
blades. Fix the blades in
place
retaining
anticlockwise to tighten (it
has a left-handed thread)
• Attach the front guard to the
rear grille using the guard
clamp, and tighten the fixing
screw to retain in place.
Page 2
using the blade
nut. Rotate