These instructions should be read carefully and left with the user of the product for future
reference.
Before assembly please Inspect the product including its cable and plug for any signs of
damage. If the product is damaged, DO NOT use it, and contact your supplier immediately.
To assemble the fan place the base frame on a firm flat surface and using your thumb push
on the spring button on the arms on either side of the fan housing. The arms should locate
in the corresponding holes in the base frame and the spring buttons should clip into the
locating hole in the base.
Plug the mains lead into a 13 Amp mains socket. If any other appliances are
•
connected to the same extension lead, make sure that it is rated for the total power of
all appliances connected.
If connecting via an extension lead, make sure that the lead is rated at 3 Amps or
•
more, and that it is fully unwound.
Switch the appliance on at the mains socket.
•
Use the rotary switch to the speed required:
•
o
o
o
o
It is normal for the motor to become warm in normal use.
•
Unplug the appliance from the mains when not in use.
•
2816
IMPORTANT
Installer and Users please note:
ASSEMBLY INSTRUCTIONS
OPERATION
O = OFF
1 = low speed
2 = medium speed
3 = high speed
Spring Button
Locating Hole
2
Ver. 2 - 04/14