Stop Watch Function; Countdown Function - Silvercrest KH 2030 Operating Instructions Manual

Stop watch function

The stop watch function is only available when the radio is switched off.
• Press and hold down the
shows 00.00.0 U.
SNOOZE
• Press
watch is 99 minutes and 59 seconds. If the stop watch exceeds the
maximum time, 99:59.0 is displayed and flashes.
• During time measurement, it can be stopped by pressing
SNOOZE
• Pressing
• Hold down
• Leave the stop watch by pressing

Countdown function

The countdown function is only available when the radio is switched off.
Set and save countdown
• Press and hold down the
screen shows D 00.00.
UP
• Press the
5 countdown times are preset on the memory buttons and you can open
these directly using the corresponding memory button:
M.0/5
Button
M.1/6
Button
M.2/7
Button
M.3/8
Button
M.4/9
Button
MEM
• Press the
flashes on the screen. Now use the
ry space; when you press the relevant memory key the time is saved in this
memory space and the time previously stored there overwritten.
PAGE
to start the stop watch. The maximum time for the stop
again restarts the stop watch.
SNOOZE
to reset the stop watch.
MEMORY SCAN
DOWN
or button to set the desired time.
10:00
30:00
45:00
60:00
90:00
button to save the set time, the memory space indicator
button for around 2 seconds, the screen
PAGE
.
button for around 2 seconds, the
M.0/5 M.4/9
– buttons to select a memo-
- 18 -
SNOOZE
.
MEM