1 Instruction for Use
Thank you for using our Honeywell VISTA CAFP100Fxx series fingerprint recognition terminal (FRT). Please
read this manual carefully before using this product for a comprehensive understanding so as to avoid
causing unnecessary damages to the product.
Protect the FRT from exposure to direct sunlight or strong beam as strong beam greatly affects the fingerprint
collection and leads to fingerprint verification failure.
Avoid using the FRT outdoors in summer. The working temperature of CAFP100Fxx series ranges from 0–40
The heat dissipated during longterm operation may easily lead to response slowdown and verification pass
rate decrease. It is recommended to use sunshades and heat sink devices for protection of the FRTs outdoors.
We recommend you to use the FRT properly so as to achieve the optimal recognition effect and verification speed.
1. Install a CAFP100Fxx FRT and then enroll your fingerprint for comparison
Installation
Enrollment
Recognition
Installation
2. Recommended fingers
Recommended fingers: The index finger, middle finger or the ring finger; the thumb and little finger are not
recommended (because they are usually clumsy on the fingerprint collection screen).
3. Finger Placement
1) Proper finger placement:
2) Improper finger placement:
Not flat to the surface
Honeywell VISTA Series Products User Manual
Recognition
Enrollment
The finger is flat to the surface and centered in fingered guide.
Slanting
1
Offcenter
Offcenter
°
C.