6) Press OK to save the enrolled data and exit the password enrollment.
3.1.3 Enroll Both Fingerprint and Password
1) Select Menu →Mange User →Enroll User to display the [Enroll User] interface. Select [FP&Pwd] and
press OK to proceed.
2) Press OK to confirm and proceed.
3) Input a number (from 1–65534) in the [User ID] field. Press OK to display the fingerprint enrollment
interface.
4) Place the same finger for three consecutive times on the fingerprint reader according to system prompts. If
the enrollment succeeds, the following information is displayed:
5) Input your password in the [Input Pwd] field and press OK to proceed.
6) Reenter your password in the [Pwd Affirm] field and press OK to confirm your entry and proceed.
Honeywell VISTA Series Products User Manual
New Enroll
00006P
ESC(N)
OK(Save)
Note: The last digit "P"
in "00006P" denotes
password.
FP & Pwd
New Enroll?
ESC(N)
New Enroll
UserID 00008
ESC(Exit)
New Enroll
000080
Place Finger...
ESC / Exit
New Enroll
000030
Input Pwd *****
ESC(Exit)
New Enroll
000030
Input Pwd *****
Pwd Affirm *****
7
OK(Y)
OK(Y )
OK(Y)