7) Press OK to save the enrolled data and complete the fingerprint and password enrollment.
3.1.4 Enroll an ID Cardê
1) Select Menu →Mange User →Enroll User to display the [Enroll User] interface. Select [Reg RFID] and
press OK to proceed.
2) Press OK to confirm and proceed.
3) Input a number (from 1–65534) in the [User ID] field. Press OK to display the ID card enrollment interface.
4) Swipe your card and the system reads your card number.
5) Press OK to confirm and proceed.
Honeywell VISTA Series Products User Manual
New Enroll
000080P
ESC(N)
OK(Save)
Note: The second digit
"0" from the bottom in
"000080P"
one fingerprint, and the
last digit "P" denotes
password.
Reg RFID
New Enroll?
ESC(Exit)
OK(Save)
New Enroll
Show the card
User ID: 00010
ESC(Exit)
OK(Save)
New Enroll
000010C
ESC(Exit)
OK(Save)
New Enroll
User ID: 00010
ESC(Exit)
OK(Save)
8
denotes