Robinsons Rowton Assembly Instructions Manual page 6

THE DIMENSIONS BELOW ARE THE EXACT EXTERNAL BASE DIMENSIONS FOR THE ROBINSONS RANGE.
We cannot emphasis how important it is to have a proper base for your Robinsons Greenhouse to be erected upon.
It is essential that the BASE IS FLAT, LEVEL AND SQUARE AS WELL AS BEING SUBSTANTIAL enough to take the
weight of the greenhouse including its 4mm glass.
Give yourself enough room around your base to allow for fitting the glass and any on-going maintenance / cleaning. A slab base which
is larger than the greenhouse is the ideal solution and is our preferred foundation.
A brick perimeter base is equally suitable providing there is a concrete foundation beneath it. We suggest using a solid brick with no
frogs or holes (quality stock bricks or semi-engineering bricks).
IMPORTANT: Do not anchor your greenhouse down until it is fully assembled including glazing unless you are 100% sure your base is
square and level. If not your glass will not fit properly.
IMPORTANT: If you have anything overhanging the ridge on a lean-to building then please make sure it does not interfere with the mo-
tion of the roof vents.
EXTERNAL DIMENSIONS (mm)
Model sizes listed are nominal,
use 'mm' measurements.
i.e.: an 4 x 10 is the model 4'6" x 10' 8"
MODEL A
4 x 2
4 x 4
ROWTON
4 x 6
4 x 8
4 x 10
4 x 12
EQUAL
B C
(mm) WIDTH (mm) LENGTH
772
1392
2012
1366
2632
3252
3872
6
(mm) DIAGONAL
1569
1950
2432
2965
3527
4106