Advertisement
(Fig 5) OPTION 2014-16 only: Remove bumper
bolts attaching bumper to inner bracket. Remove
outer bumper first, then remove inner brackets
(Fig 7) End of frame once factory bumper is removed.
Passenger side with receiver hitch pictured
Passenger/right side installation pictured
10mm x 50mm Hex Bolt
(2) 10mm Flat Washers
10mm Nylon Lock Nut
ECO-SERIES REAR BUMPER 2007-2016 CHEVY
WARNING! Before removing hardware,
fully support the weight of the bumper
with blocks or stands to prevent injury
or damage to the vehicle.
(Fig 6) End of frame once factory bumper is
removed. Passenger side w-o receiver hitch pictured
(Fig 8) Attach Bumper Bracket to side mounting
holes in frame and hitch if equipped
SILVERADO\GMC SIERRA 1500
14mm x 45mm Hex Bolt
(2) 14mm Flat Washers
14mm Nylon Lock Nut
Rear
Advertisement
