Advertisement
(Fig 1) Remove bumper bolts from outside of frame
(arrows). Passenger side pictured from below
WARNING! Before removing hardware,
fully support the weight of the bumper
with blocks or stands to prevent injury
or damage to the vehicle.
(Fig 3) Remove bumper bolts attaching brackets to
frame (arrows). Model with receiver hitch pictured
from below
Passenger/right side installation pictured
ECO-SERIES REAR BUMPER 2007-2016 CHEVY
2014-16 models, remove rear bed to
frame bolts, loosen center bolts, (if
equipped). Do not loosen front bolts.
(Fig 2) Remove bumper bolt from bottom of
frame (arrow). Back of passenger side of
model w-o receiver hitch pictured from below
Rear
(Fig 4) OPTION 2014-16 only: Release clips
to remove plastic bumper cover (arrow).
Passenger side pictured from below
SILVERADO\GMC SIERRA 1500
Advertisement
