Advertisement
PARTS LIST:
1
LD1 Rear Bumper Assembly
1
Driver/left Frame Bracket
1
Passenger/right Frame Bracket
1
License Plate Light
2
License Plate Plugs
4
Sensor Hole Plugs
1
Trailer Plug Bracket 07-13
1
Trailer Plug Bracket 2014+
10 Nylon Wire Ties
6
14-2.0mm x 45mm Hex Bolts
12 14mm x 28mm OD x 2.5mm Flat Washers
6
14mm Nylon Lock Nuts
(2) Plastic Nuts for License Plate
Driver/left
Frame Bracket
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY
RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.
1. Remove the license plate. On models with bumper sensors, unplug all sensors. Remove the trailer plug
from the bumper. Release the wiring harness from the clips attached to the back of the bumper and
move harness away from bumper as necessary.
2. Place blocks or jack stands under the bumper to support it during mounting bolt removal.
3. Determine procedure for your model year:
07-13 Models.
a. Starting on the passenger/right side, remove (2) hex bolts attaching bumper to top/center of
receiver hitch if equipped.
b. Remove hex bolts from side and bottom of frame, (Figures 1—3).
c. Repeat previous Steps to remove driver/left side hardware.
d. With assistance, pull bumper and brackets straight out from vehicle, (Figures 6 & 7).
14-16 Models.
a. Starting on the passenger/right side, remove rear bolts attaching bed to frame, (Figure 2).
Loosen center bolts (if equipped). Do not loosen front bolts.
b. Remove hex bolts from side and bottom of frame, (Figures 1—3).
c. Repeat previous Steps to remove driver/left side hardware.
4
12-1.75mm x 35mm Hex Bolts
8
12mm x 37mm OD x 3mm Flat Washers
4
12mm Nylon Lock Nuts
2
10-1.5mm x 50mm Hex Bolts
4
10mm x 34mm OD x 3mm Flat Washers
2
10mm Nylon Lock Nuts
2
6mm x 16mm Hex Bolts
4
6mm ID x 12mm OD x 1.6mm Flat Washers
2
6mm Nylon Lock Nut
1
4mm Allen Wrench
8
4mm x 10mm Button Head Bolts
2014-on Trailer
Plug Bracket
2007-13 Trailer
Plug Bracket
ECO-SERIES REAR BUMPER 2007-2016 CHEVY
SILVERADO\GMC SIERRA 1500
License Plate Light
(4) Sensor
Hole Plugs
Passenger/right
Frame Bracket
Advertisement
