Auto Retry If Transfer Fails - Canon WFT-R10 Advanced User's Manual

Auto Retry if Transfer Fails

If transfer fails, the transmitter's 〈
screen is displayed after you press the 〈
To resolve the error displayed, see Troubleshooting.
Once the cause of the error is eliminated, the images whose transfer previously failed will be
re-transferred automatically. With this option activated, transfer is attempted again
automatically after failure, whether automatic transfer is used or captured images are
transferred via FTP. Note that when you cancel image transfer or turn off the transmitter or
camera, the image will not be re-transferred automatically.
See Batch Transfer
Note
If you prefer not to disconnect from the LAN, set [Power saving] on the [FTP
transfer settings] screen (
and transfer the images.
) to [Disable].
〉 lamp blinks in red. In this case, the following
〉 button and select [
85
: WFT settings].