10.
Select [New settings].
Select [OK] to proceed to the next screen.
If the camera has registered communication settings, you can apply the
registered settings by selecting [Select from list].
For [Configure online]
• To connect a device via an access point, go to
Access
• To directly connect a device to the camera, go to
Camera Access Point
For [Configure offline]
• To connect a device via an access point, go to
Infrastructure.
• To directly connect a device to the camera, go to
Camera Access Point
Point.
Mode.
Mode.
31
Checking the Type of
Connecting in
Connecting Using an
Connecting in