Canon WFT-R10 Advanced User's Manual page 170

2.
Charge the battery.
Supplying power
To power the camera without charging, set the camera power switch to 〈
during auto power off, the battery is charged.
To change from powering the camera to charging, set the camera power switch to
〈 〉.
Connect the power cord to the USB power adapter and plug the other
end into a power outlet.
Charging begins, and the charge lamp is lit in green. 〈
displayed on the LCD panel.
When charging is finished, the charge lamp turns off.
170
〉 is
〉. Note that