Canon WFT-R10 Advanced User's Manual page 56

3.
Enter the desired values.
Use 〈
〉 to select a number. Press 〈
〈
number.
To set the entered values and return to the screen in step 2, press the
〈
4.
Select [OK].
When you have completed setting the necessary items, select [OK].
The next screen is displayed.
If you are not sure what to enter, see
the network administrator or similar person.
5.
Select the IPv6 setting.
Select an item and select [OK] to go to the next screen.
If you select [Enable], configure the IPv6 settings after completing all
other settings (
When the settings are complete, the next screen is displayed.
〉 to select the input position in the upper area and use
〉 button.
).
56
〉 to enter the selected
Checking Network Settings or ask