Connecting Via Wps (Pin Mode) - Canon WFT-R10 Advanced User's Manual

Connecting via WPS (PIN Mode)

These instructions are continued from
This is a connection mode available when using an access point compatible with WPS. In
PIN code connection mode (PIN mode), an 8-digit identification number specified on the
camera is set at the access point to establish a connection.
Even if there are multiple access points active in the surrounding area, a relatively
reliable connection can be established using this shared identification number.
It may take approx. one minute to establish a connection.
1.
Select [Connect with WPS].
2.
Select [WPS (PIN mode)].
Checking the Type of Access
Select [OK] to proceed to the next screen.
35
Point.