Table of Contents
Advertisement
Network Setup
Management IP Setup
Network Setup Page of DT-IPTV-QAM-12C-SD
Use the Network Setup to configure the device's Management Port's IP address (GUI address) of the device, Subnet
Mask, Gateway, Enable/Disable DHCP, and set Host Name.
Save and Confirm: Once all parameters are set remember to Save and Confirm all changes.
Factory Default Management port IP: 192.168.1.9
NACE: 610-429-1511 | sales@datatronix.biz | www.datatronix.biz | DT-IPTV-QAM-12C-SD Manual v1.0 Page 13
Advertisement
Table of Contents
Need help?
Do you have a question about the DT-IPTV-QAM-12C-SD and is the answer not in the manual?