Connecting Your Computer To The Jet67; Overview; Install Jetstream Server - Logitek mixIT Setup Manual

Connecting Your Computer To The JET67

Overview

We use a program called JetStream Server to make an IP connection to the DSP card inside the
JET67 to configure the engine.
JetStream Server, in turn, serves web pages to your web browser to enter information and
upload to the engine.
Your configuration is stored in memory on the JET67. After you have configured the JET67 you
can disconnect your PC and the audio engine will continue to control the computer. It is not
necessary for JetStream Server to be connected to operate the console.
The configuration will remain in memory on the JET67 even if power is disconnected.
You can save the configuration in a JET67 to an .XLS file and keep it backed up and you can
restore that .XLS file to the JET67 using JetStream Server.

Install JetStream Server

Logitek mixIT Audio Console System/JET67 Manual 10