ASSEMBLY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are missing,
please contact Customer Service at (866)-985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email at cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware.
CHAIR ASSEMBLY
1
Attach the Chair Back
pre-installed studs at the base of the Chair Back into the holes
on the Seat. Secure with a Washers/Spring Washers/Nuts
that order) on each stud.
Hardware Used:
2
Turn the seat upside-down. Attach the Chair Legs
E
Seat
by inserting the pre-installed studs on the bottom of
the Seat into the holes at the top of each Chair Leg. (HINT: Begin
with REAR legs, then attach FRONT legs.) Secure each Leg with 2
sets of Washers/Spring Washers/Nuts
OVERTIGHTEN.
Hardware Used:
Contact us for assistance: (866) 985-7877 | www.wtliving.com
D
E
to the Seat
by inserting the
H
8mm Washer/Spring Washer/Nut x2
H
(in that order). DO NOT
H
8mm Washer/Spring Washer/Nut x8
H
(in
F
to the
1
2
4