Bosch Professional GO Original Instructions Manual page 22

22 | English
Product Description and Specifications
ginning of this operating manual.
Intended Use
The power tool is intended for screwing in and loosening screws.
Product features
The numbering of the product features refers to the diagram of the power tool on the
graphics page.
(1) Screwdriver bit
(2) Tool holder
(3) Torque presetting ring
(4) On/off switch
(5) Rotational direction switch
(6) Battery charge indicator
(7) Micro USB port
(8) Handle (insulated gripping surface)
(9) USB cable
A)
(10) Power supply
A) Accessories shown or described are not included with the product as standard. You can
find the complete selection of accessories in our accessories range.
Technical data
Cordless Screwdriver
Article number
Rated voltage
A)
No-load speed
1 609 92A 5MN | (12.02.2020)
Read all the safety and general instruc-
tions. Failure to observe the safety and
general instructions may result in electric
shock, fire and/or serious injury.
Please observe the illustrations at the be-
V=
–1
min
GO
3 601 JH2 1..
3.6
360
Bosch Power Tools