Bosch Professional GO Original Instructions Manual page 20

20 | English
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slip-
u
pery handles and grasping surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
Recharge only with the charger specified by the manufacturer. A charger that is
u
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
Use power tools only with specifically designated battery packs. Use of any other
u
battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like pa-
u
per clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
u
If contact accidentally occurs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modi-
u
fied batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure
u
to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool out-
u
side the temperature range specified in the instructions. Charging improperly or
at temperatures outside the specified range may damage the battery and increase the
risk of fire.
Service
Have your power tool serviced by a qualified repair person using only identical
u
replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be per-
u
formed by the manufacturer or authorized service providers.
Safety Warnings for Screwdrivers
Hold the power tool by insulated gripping surfaces, when performing an opera-
u
tion where the fastener may contact hidden wiring. Fasteners contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the oper-
ator an electric shock.
1 609 92A 5MN | (12.02.2020) Bosch Power Tools