Bosch Professional GO Original Instructions Manual page 19

Remove any adjusting key or wrench before turning the power tool on. A wrench
u
or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables bet-
u
ter control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
u
clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection facil-
u
ities, ensure these are connected and properly used. Use of dust collection can re-
duce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become com-
u
placent and ignore tool safety principles. A careless action can cause severe injury
within a fraction of a second.
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The
u
correct power tool will do the job better and safer at the rate for which it was de-
signed.
Do not use the power tool if the switch does not turn it on and off. Any power tool
u
that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if
u
detachable, from the power tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfa-
u
miliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of
u
moving parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
u
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these in-
u
structions, taking into account the working conditions and the work to be per-
formed. Use of the power tool for operations different from those intended could res-
ult in a hazardous situation.
Bosch Power Tools
English | 19
1 609 92A 5MN | (12.02.2020)