Measuring Functions
Measuring single distance
1
2
Permament / Minimum-Maximum measuring
1
2
2 sec
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values).
Add / Subtract
1
2
The next mea-
surement is added
7.332
to the previous
one.
Leica DISTO
TM
E7300 788218a
Find Quality Products Online at:
Aim active laser at target.
min.
max.
The next mea-
surement is sub-
tracted from the
previous one.
GlobalTestSupply
www.
3
8.532
The minimum and maximum dis-
tance measured is displayed (min,
max.). The last value measured is
displayed in the main line.
8.532
3
7.332
12.847
.com
Target surfaces: Measuring errors
can occur when measuring to
colourless liquids, glass, styrofoam
or semi-permaeble surfaces or
when aiming at high gloss surfaces.
Against dark surfaces the
measuring time increases.
3
Stops permanent / minimum-
maximum measuring.
The result is shown in the main line
and the measured value above.
This process can be repeated as re-
quired. The same process can be
used for adding or subtracting ar-
eas or volumes.
sales@GlobalTestSupply.com
EN
5