Advertisement
2.0. PIN Assignment
2.1. LED Configuration
There is a bi-color LED
status.
2.1.1.
LED for Power status
The default LED settings when the power is on are
These LEDs cannot be controlled.
2.1.2.
LED for smart card operation status
To control the LEDs' output and checking their behavior for smart card operation status, please refer
to the ACM1252U-Z6 Reference Manual. The manual will discuss how PC/SC APDU commands were
implemented for the contactless interface and device peripherals of the ACM1252U-Z6.
2.1.3.
Default LED Behaviors
To control the LEDs' output and check the LED's behavior, you may refer to the ACM1252U-Z6
Reference Manual.
ACM1252U-Z6 – User Manual
Version 1.00
(Red
and Green) on the ACM1252U-Z6 to display and control its operation
Figure 1: LED Configuration
Red
and
Green
and then slow flashing Green.
Page 4 of 7
info@acs.com.hk
www.acs.com.hk
Advertisement
