In order to get the most out of your new MicroCom 2400XR, please take a few moments to read this manual completely so that you better understand the operation of this product. This document applies to model PMC-2400XR.
• PAC-MC-SFTCASE: MicroCom Soft Travel Case • PBT-XRC-55: MicroCom XR 5+5 Drop-In Belt Pack and Battery Charger • PHS-SB11LE-DMG: SmartBoom® LITE Single Ear Pliant headset with Dual Mini connector for MicroCom • PHS-SB110E-DMG: SmartBoom PRO Single Ear Pliant headset with Dual Mini connector for MicroCom •...
SETUP Attach the belt pack antenna. It is reverse threaded; screw counter-clockwise. 2. Connect a headset to the belt pack. 3. Power on. Press and hold the POWER button for two (2) seconds, until the screen turns on. 4. Access the menu. Press and hold the MODE button for 2 seconds, until the screen changes to <SETTING MODE>.
Each separate MicroCom system should use the same Group and Security Code for all belt packs in that system. Pliant recommends that systems operating in proximity to one another set their Groups to be at least ten (10) values apart. For example, if one system is using Group 03, another...
MENU SETTINGS The following settings are adjustable from the belt pack menu. To access the menu, press and hold the MODE button for 3 seconds, until the screen changes to <Setting Mode>. 2. Short-press the MODE button to scroll through the settings: Group, ID, Side Tone, Mic Gain, Channel A, Channel B, and Security Code.
Page 9
R E CO M M E N D E D S E T T I N G S B Y H E A D S E T The following table provides recommended MicroCom settings for several common headset models. Recommended Setting Headset Model Mic Gain Headset with boom mic...
Display OLED * Notice about Specifications: While Pliant Technologies makes every attempt to maintain the accuracy of the information contained in its product manuals, that information is subject to change without notice. Performance specifications included in this manual are design-centered specifications and are included for customer guidance and to facilitate system installation. Actual operating performance may vary.
Number. Obtaining a Return Material Authorization Number will ensure that your equipment is handled promptly. All shipments of Pliant products should be made via UPS, or the best available shipper, prepaid and insured. The equipment should be shipped in the original packing carton; if that is not available, use any suitable container that is rigid and of adequate size to surround the equipment with at least four inches of shock-absorbing material.
LICENSE INFORMATION P L I A N T T E C H N O L O G I E S M I C R O CO M FCC CO M P L I A N C E STAT E M E N T 00004394 (FCCID: YJH-GM-900MSS) 00004445 (FCCID: YJH-GM-24G) This equipment has been tested and found to comply with the limits for a Class B digital device,...
® All headsets and accessories (including Pliant-branded batteries) carry a one-year warranty. The sole obligation of Pliant Technologies, LLC during the warranty period is to provide, without charge, parts and labor necessary to remedy covered defects appearing in products returned prepaid to Pliant Technologies, LLC.
Page 14
PA R T S L I M I T E D WA R R A N T Y Replacement parts for Pliant Technologies, LLC products are warranted to be free from defects in materials and workmanship for 120 days from the date of sale to the end user.
Need help?
Do you have a question about the MICROCOM 2400XR and is the answer not in the manual?
Questions and answers