Pliant Tempest2400 MasterBelt Quick Start Manual

Quick Start Guide
Tempest2400 MasterBelt
2-Channel Quick Start Guide
What's in each box:
MasterBelt
• MasterBelt
• Li-Poly rechargeable battery
• 3.5mm to 3.5mm 3 conductor data pairing cable
» Used to pair a BaseStation to the BeltStation(s)
• USB-A to Mini-USB
» Used to update MasterBelt or BeltStation firmware
• 5VDC wall charger with Mini USB connector
• CD with manual

What else you may need:

• Headset, one for each user
» May be dynamic or electret microphone, with a 4-PIN XLR female
connector

Important things you need to know:

• Tempest2400 operates in the 2400 to 2483 MHz frequency spectrum.
• The Tempest MasterBelt and BeltStation are shipped with a default RF
configuration. It is highly recommended that you change your system
from the default to ensure proper RF performance especially in the
presence of other Tempest systems.
• A BeltStation must be paired with a MasterBelt for any communication
to take place. Pairing should be done AFTER the default RF
configuration is changed on the BaseStation.
• Charge the MasterBelt and BeltStation batteries prior to starting set-up.
1
®
Copyright © 2016 Pliant Technologies, LLC. All rights reserved. The Pliant
word mark and the Pliant "P" logo are trademarks of Pliant Technologies,
LLC. Tempest
Pliant Technologies, LLC
205 Technology Parkway
www.plianttechnologies.com
Phone +1.334.321.1160
Toll-Free 1.844.475.4268 or 1.844.4PLIANT
® and MasterBelt ® are trademarks of CoachComm LLC. All other
trademarks are property of their respective owners.
Document Reference: 2018.11 D0000157_D
Tempest
®
Auburn, AL 36830
Fax +1.334.321.1162
®