Watchguard Firebox M4600 Hardware Manual page 12

Hardware Specifications
4 port 10G SFP+ Interface Module
The four SFP+ ports are numbered 0 - 3. To use these interfaces, you must plug in a compatible SFP+
transceiver.
Each SFP+ port has two indicators. The left indicator shows link status, the right indicator shows activity.
Indicator
Connection (left)
Activity (right)
You can purchase compatible SFP+ transceivers from an authorized WatchGuard reseller:
SFP+ multi-mode transceiver (10GBase-SR/1000Base-SX 850 nm)
FINISAR FTLX8571D3BCV
WatchGuard SKU WG8583
8
Indicator color
Green
Not lit
Orange, blinks
Not lit
Interface Status
Operates at 10 Gbps or 1 Gpbs
No link
Power on, network activity
Power off, no connections
WatchGuard Firebox M4600