Watchguard Firebox M4600 Hardware Manual page 11

8 port 1G SFP Interface Module
The eight SFP interfaces are numbered from 0 to 7. To use these interfaces you must plug in a compatible SFP
transceiver.
Each SFP interface has two indicators. Indicators are located in the center of the interface module, between
the upper and lower row of interfaces. Indicators that point up (
Indicators that point down (
Interface 0 Activity
Interface 1 Activity
For each interface, the left indicator shows activity, and the right indicator shows the link status..
Indicator
Activity (left)
Connection (right)
You can purchase compatible SFP transceivers from an authorized WatchGuard reseller:
SFP multi-mode transceivers (1000Base-SX, 850nm)
FINISAR FTLF8519P3BNL
WatchGuard SKU WG8585
Hardware Guide
▼
) show the status of the lower interface.
0
Interface 0 Link
Interface 1 Link
1
Indicator color
Orange, blinks
Not lit
Orange
Not lit
Hardware Specifications
▲
) show the status of the upper interface.
Interface Status
Power on, network activity
Power off, no connections
Link at 1000 Mbps
No link
7