Safety And Warnings - Kogan F600 User Manual

SAFETY & WARNINGS
Read these safety instructions thoroughly before using your device and store them for future
reference.
•
To ensure a stable power supply, use the standard power cord provided with the
unit.
•
To avoid hurting your eyes, do not look directly at the light from the lens when the
projector is operating.
•
Ensure that the projector is used in a dry and well-ventilated environment. Do not
place any liquid on the top of the projector.
•
Do not place the projector near heat sources, in direct sunlight or moisture-prone
environments.
•
The air inlet/outlet and lens should be unobstructed to avoid diminishing the
projector's ability to dissipate heat and damaging the internal electronic
components.
•
To maintain projector's performance and reliability, keep a minimum of 10-15cm
space around the projector to ensure proper heat dissipation and ventilation.
• Ensure the projector and its components are out of reach of children.
•
Do not store the projector in an overly warm or environment. The recommended
operating temperature is 5°C~35°C.
•
Do not throw, knock or shake the projector. This may damage the internal
components.
•
When replacing the battery in the remote control, ensure that the replacement
battery is of the same type and equivalent power rating.
•
Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, stop using it immediately and contact
Kogan.com to arrange a repair.
•
It is recommended to power off the projector after 6 hours of continuous operation.