5.
Multimedia Connection
When connecting with different devices, the correct signal source will need to be
selected to view the image. Press the Source button to select from the available
connections:
(The picture is for reference only; ATV is an optional function)
USB connection
Insert a USB flash drive into the USB port and choose USB1 or USB2. Press the Play button
to start or stop playback.
HDMI connection
This connection supports most devices with a HDMI slot. Use a HDMI cable to connect the
HDMI output of a device to the projector and select "HDMI1" or "HDMI2" as the signal
source accordingly.
AV connection
Use an AV cable to connect the AV output of a device to the projector and select the "AV"
source input.
Audio Out connection
Use an audio cable with a 3.5mm jack to connect headphones or speakers to the projector.
VGA connection
Use a VGA cable to connect the VGA output of a device to the projector and choose the
"PC-RGB" source. Note that VGA connections do not pass audio; you will need to connect
additional external speakers to the "Audio Out" connection for audio playback.