Assembly; Starting Up And How To Use - Texas Smart Hedge 200 User Manual

Always charge and keep the charger indoor.
The charger will automatically stop charging when the battery is full. It is not
recommended to stay charging for more than 24 hours
There are no indicators on the charger for when the battery is full. It is recommended that
the user keep track of charge time.
The surface of the battery can get warm during charging, this is normal.
While not in use the battery should be stored in a warm and dry environment.
Important
To protect the battery from full discharge, the product will stop automatically before the
battery is full discharged.
The Machine must not be started again after automatic switch off.
The battery must then be fully recharged before the work can be continued.

Assembly

The hedge trimmer is fully assembled in the box. Only the battery needs assembly.
Insert the battery
Hold the battery in one hand and insert in the
groove on the back of the product.
Check the battery is properly inserted before
use.

Starting up and how to use

The hedge trimmer is equipped with a two-step safety switch. The machine will only work
when the on/off switch in the handle (1) and on the front handle (2) are activated at the
same time. If one of the switches is released the blade will stop running.
2
1
15