Siemens TE809 Series Instruction Manual page 25

Duration: approx. 30 minutes.
Descale
lashes while the differ
ent descaling processes are running.
The igures on the top right indicate the
progress of the programme.
If there is a water ilter
before the service programme is run.
à b u t t o n 3
●
Descale ▶
●
guide you through the programme.
Empty drip tray
Replace drip tray
●
Place suction pipe in container ▶ start
● Place a container with 1 litre capacity
●
the container.
●
Remove water filter ▶ start
If the water ilter
display will prompt you to remove the ilter
▶ start
.
; the display
and reinsert it.
.
.
again.
Add 0.5 l water and descaler ▶ start
●
tablets in it.
●
20 minutes.
Refill fluid ▶ start
prompt is displayed. Pour in descaling solu
Clean and refill water tank ▶ start
●
●
programme now runs for about 1 minute
and rinses the appliance.
Empty drip tray
Replace drip tray
●
Replace the ilter if one is being used. The
appliance is ready for use again.
remove any descaler residue. Such residue
can cause corrosion. New sponge cloths
may contain salts. Salts can cause rust
ilm on stainless steel and must therefore
be washed out thoroughly before use.
the milk frother.
. The descaling
again.
and reill it with
" mark.
. The descaling
and reinsert it.