Download Print this page

Advertisement

Quick Links

Installation Manual
DWA3500
CEMB S.p.A.
Via Risorgimento, 9
23826 Mandello del Lario (LC) ITALY
Telefono: + 39 706369 Fax: + 39 0341 700725
www.cemb.com garage@cemb.com
The Manufacturer declines all liability for any damage to people or property caused by incorrect use of this product.
Subject to change without prior notice.

Advertisement

loading

Summary of Contents for CEMB DWA3500

  • Page 1 Installation Manual DWA3500 CEMB S.p.A. Via Risorgimento, 9 23826 Mandello del Lario (LC) ITALY Telefono: + 39 706369 Fax: + 39 0341 700725 www.cemb.com garage@cemb.com The Manufacturer declines all liability for any damage to people or property caused by incorrect use of this product.
  • Page 2 Istruzioni originali Translation of the original instructions Traduction de la notice originale Übersetzung der Originalanweisungen Traducción de las instrucciones originales Tradução das instruções originais...
  • Page 3 Position the vertical post, as indicated Fix the vertical post top plastic cover Fix it to the floor with 4 bolts Remove the screw from the post back Remove the screws from the sides of the cabinet and mount the target holders And fix the camera beam to the vertical post (use a bubble level to fix it levelled) (the bigger ones in the lowest position, than the others in the upper one)
  • Page 4 Mount the monitor bar support and the lockers Mount the monitor support Hang the monitor Fix the multiplug on the vertical post...
  • Page 5 Plug the USB Wireless Touchpad Keyboard and the Wi-Fi antenna Plug the power cable for the: Monitor (if present) Secondary monitor (if present) Printer (if present) Splitter If present plug all the cables, as indicated, for the secondary monitor splitter...
  • Page 6 Plug the motor cable Plug the interface cable cameras and clamp it as indicated Fix with the related covers the: Monitor signal cable Monitor power cable Webcam USB cable...
  • Page 7 Plug the main power and You’re now ready to switch the DWA3500 ON Installation done...