Transducer Disassembly - Smeg 4060 Series Service Manual

TOOL No. 1 Phillips slotted screwdriver
GLOVES
1- Remove the skirting board.
3. Slip the protection downwards and rotate it
slightly forward to remove it completely from the

TRANSDUCER DISASSEMBLY

Tools required in this disassembly procedure
23
Disassembly sequence series 4060
TOOL No. 2 Long nose pliers
2 Remove the two screws that secure the
components protection (tool no. 1)
4. Remove the clamp that secures the transducer
tube (tool no. 2)