Download
Share
Print this page
Smeg ST2FABBL Instruction Manual
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Dishwasher
  5. ST2FABBL
  6. Instruction manual

Smeg ST2FABBL Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
G
U
I
D
E
F
O
R
U
S
G
U
I
D
E
F
O
R
U
S
I
N
G
T
H
E
D
I
S
H
W
A
S
I
N
G
T
H
E
D
I
S
H
W
A
S
smeg-tr.com
H
E
R
A
N
D
T
H
E
W
A
H
E
R
A
N
D
T
H
E
W
A
S
H
I
N
G
P
R
O
G
R
A
M
S
H
I
N
G
P
R
O
G
R
A
M
S
S

Advertisement

loading

Related Manuals for Smeg ST2FABBL

Summary of Contents for Smeg ST2FABBL

  • Page 1 INSTRUCTION MANUAL smeg-tr.com...
  • Page 2 Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term. USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures. smeg-tr.com...

  • Page 3: Description Of The Controls

    QUICK TIME + EXTRA OPTION BUTTON (see “EXTRA OPTIONS” section) The button controls selection of the quick time programs. (see table). QUICK TIME PROGRAM LIGHT Illuminates to indicate that one of the extra programs (see table) is going to be executed. smeg-tr.com...
  • Page 4 PROGRAM SELECTION button (3) until the  indicator light corresponding to the desired program illuminates; close the door; after about 2" the program will start. While it is in  progress, the relative LIGHT will flash (indicating that the program is being executed). smeg-tr.com...
  • Page 5 (e.g. because the door is opened or due to a power blackout), the program lights flash to warn that the anti-bacteria effect is not guaranteed. If the dishwasher door is open or not properly closed, the washing cycle will not start. smeg-tr.com...
  • Page 6 Wash at 65°C and FAST 1,20 dirt without dried-on Cold rinse residues. Rinse at 70°C IMPORTANT: see “NOTES AND REFERENCES” table on the following pages. If the dishwasher door is open or not properly closed, the washing cycle will not start. smeg-tr.com...
  • Page 7 The programme is recommended for dishes with a normal level of dirt. Drying efficiency class on a scale from “G” (minimum efficiency) to “A” (maximum efficiency). smeg-tr.com...
  • Page 8 If this function is active, never prevent the door from opening by any means, clear the space necessary to allow the opening of the door. Do not force the closure of the door before the end of cycle signal, because this would damage the mechanism. smeg-tr.com...
  • Page 9 Keep pressing to select the delay required, which may be up to 9, 12 or 24 hours depending on the model. When the door is closed, the appliance will prewash the dishes, after which the "program delay" set will come into effect. smeg-tr.com...
  • Page 10 Use the washing program that is most appropriate for each type of  load.  Do not carry out any preliminary rinsing. If available, connect the dishwasher to a hot water supply up to 60°C.  Use the ENERSAVE option.  smeg-tr.com...
  • Page 11 To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket. smeg-tr.com...

  • Page 12: Operating Instructions

    In the event of this occurring, the warranty will be invalidated.  Only use regenerating salt specially formulated for domestic dishwashers. If using salt tablets, do not fill the container completely. smeg-tr.com...
  • Page 13 To access the setting function, hold the button down for more than 15 seconds. The WATER HARDNESS ADJUSTMENT INDICATOR LIGHT (4) flashes, while the SELECTED PROGRAM INDICATOR LIGHTS (2) show the current setting. Each pressure on the button changes the setting following the sequence in the table below: > smeg-tr.com...
  • Page 14 With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required. smeg-tr.com...
  • Page 15 The amount of rinse aid must be increased if the washed dishes appear dull or feature circular stains. If, on the other hand, the dishes are sticky or have white streaks, it is  necessary to reduce the rinse aid setting. smeg-tr.com...
  • Page 16 With enzyme detergents it is possible to obtain at low temperatures comparable results to those which can only be achieved at 65°C using traditional detergents. For the safeguarding of the environment we recommend the use of phosphate- and chlorine free detergents. smeg-tr.com...
  • Page 17 LOWER BASKET. There is no need to pre-wash the dishes under running water before loading them into the baskets since this only wastes water. Correct loading of the dishes helps ensure optimal washing results. smeg-tr.com...
  • Page 18 If in doubt as to the fastness of the colours, it is advisable to wash just a few items at a time for approximately one month. smeg-tr.com...
  • Page 19 2 or 4 sections. With tip-up supports BOTTOM BASKET INSERTS Some models are equipped with bottom basket inserts which improve the drying of dishes. The inserts are supplied in the accessories bag; to use them, simply fit them into place as shown. smeg-tr.com...
  • Page 20 Load plates facing forward; cups, bowls etc. must always be facing downwards. The left side of the basket can be loaded with cups and glasses on two levels. In the centre section, plates and saucers can be loaded vertically into the supports provided. Loading examples: smeg-tr.com...
  • Page 21 The cutlery basket slides across the dishwasher and can be placed in any position to allow optimal use of the space in the bottom basket. smeg-tr.com...
  • Page 22 Various loading systems and configurations are possible. For example, tea cups can be loaded with the right-hand rack set in the low position, while the left-hand rack or both can be removed to allow large dishes to be put in the top basket smeg-tr.com...
  • Page 23 User instructions Examples of loading for intensive dirt smeg-tr.com...
  • Page 24 User instructions Examples of loading for intensive dirt FLEXI DUO TOP RACK (on some models only) smeg-tr.com...
  • Page 25 Fixed or movable racks in the middle. The movable supports can be fixed vertical, resting on the bottom of the basket when not in use, or set in the intermediate position, as required. smeg-tr.com...
  • Page 26 To lower the basket, first release it by pulling the release lever (2).  Adjustment is also possible with the basket loaded, but in this case when lowering the basket it should be held steady with one hand to avoid knocking the dishes. smeg-tr.com...

  • Page 27: Cleaning And Maintenance

    Wash the arms under a jet of running water and return them carefully to their seat. After reassembly, check that the spray arms turn freely. Otherwise, check that they have been installed correctly. ORBITAL smeg-tr.com...
  • Page 28 Unplug the power cord from the socket.   Leave the door slightly open, in order to prevent the formation of unpleasant odours inside the washing tank.  Fill the rinse aid dispenser.  Shut off the water supply tap. smeg-tr.com...
  • Page 29  all the filters are clean and positioned correctly;  the spray arm nozzles are not obstructed; there is no object obstructing the rotation of the spray arms.  smeg-tr.com...
  • Page 30 If after following the above troubleshooting instructions the problem persists, call the nearest After-Sales Centre. WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user. smeg-tr.com...

  • Page 31: Troubleshooting

    The appliance does not pump out the water or does not do so correctly. Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the after-sales service. smeg-tr.com...
  • Page 32 E11: Contact the after-sales service. To “reset” an alarm is necessary:  Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again. If the malfunction persists, contact your authorised Service Centre. smeg-tr.com...

This manual is also suitable for:

St2fabpkSt2fabwhSt2fabrdSt2fabcr