Motor Disassembly - Smeg 4060 Series Service Manual

TOOL No. 1 Phillips slotted screwdriver
1- Remove the top secured by two screws on the rear
side of the machine (tool no. 1).
3.Remove the 6 lateral screws and the 3 screws on
the upper left corner that secure the rear panel of the
machine.
WASHING MOTOR DISASSEMBLY
Tools required in this disassembly procedure
13
Disassembly sequence series 4060
TOOL No. 2 Long nose pliers
2
2.Now pressing with the hand on the front top (1),
push towards the back of the machine lifting it (2),
to completely remove the component.
VIEW OF COMPONENTS ATTACHED ON THE
BACK OF THE APPLIANCE.
1