Advertisement
Instructions
1. POWER/FUNCTION CHOICE
1） Hold to switch power ON or OFF.
2） Press to switch INPUTS between "USB, OPTICAL, COAXIAL" which display
as "in1, in2, in3".
2. DISPLAY INSTRUCTIONS
1 ) When starting up the unit, it will display "
2 ) When there is no input signal or the sampling rate exceeds the range of the unit, it
will display as "
3 ) When switching inputs,it will display "
4 ) LED indicator:
Lights up in RED when STANDBY;
Lights up in BLUE when receiving DSD streaming;
Not lights up when receiving PCM streaming.
5 ) DSD FILTER
6 ) DPLL Settings （DPLL settings）
* The larger number means the stronger range to adapt to jitter. The smaller number means
the better performance against clock jitter.
".
（DSD FILTER 1）
（DSD FILTER 2）
（DSD FILTER 3）
（DPLL setting 1）
（DPLL setting 2）
（DPLL setting 3）
（DPLL setting 4）
（DPLL setting 5）
（DPLL setting 6）
（DPLL setting 7）
（DPLL setting 8）
（DPLL setting 9）
", which stands for "M100".
,
,
"
Advertisement
