Table of Contents
Advertisement
Chassis dimensions
2
Installation Requirements
2.1
Installation Angle
Vertical
2.2
Installation Space
Backward
Upside down
Mounting bracket dimensions
Forward
For ease of installing the inverter
on the mounting bracket,
connecting cables to the bottom of
the inverter, and maintaining the
inverter in future, it is
recommended that the bottom
clearance be greater than or equal
to 300 mm and less than or equal
to 730 mm. If the site cable is hard,
the space at the bottom is
recommended to be within the
range of 600 mm and 730 mm.
2
Horizontal
Advertisement
Table of Contents
