Turning On The Power; Moving The Appliance For Relocation - LG LM89SXD Owner's Manual

EN 20 INSTALLATION
1
With one hand, lift up both the inner and outer
door sections of the right door to raise them at
the middle hinge. (It may be easier to lift it with
the doors open.)
2
With the other hand, use pliers to insert the
snap ring on the middle hinge of the inner door
section as shown. Do not insert the ring on the
hinge of the outer door section.
3
Insert additional snap rings until the right door
is aligned. (Two snap rings are provided with
the unit.)

Turning on the Power

Connecting the Appliance
After installing the appliance, connect the power
plug into the outlet socket.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 3 or 4 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance for
Relocation
Preparing for Relocation
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into the
power plug hook at the rear or on top of the
appliance.
3
Tape parts such as shelves and the door handle
to prevent from falling off while moving the
appliance.
4
Move the appliance with more than two people
carefully. When transporting the appliance
over a long distance, keep the appliance
upright.
5
After installing the appliance, connect the
power plug into a mains outlet socket and
switch it on.