LG LM89SXD Owner's Manual page 19

Levelling the Appliance
The appliance has two front leveling legs. Adjust
the legs to alter the tilt from front-to-back or side-
to side. If the appliance seems unsteady, or the
doors do not close easily, adjust the appliance's tilt
using the instructions below:
1
Turn the leveling leg to the left to raise that
side of the appliance or to the right to lower it.
It may take several turns of the leveling leg to
adjust the tilt of the appliance.
NOTE
• A flare nut wrench works best, but an open-end
wrench will suffice. Do not over-tighten.
2
Open both doors and check to make sure that
they close easily. If the doors do not close
easily, tilt the appliance slightly more to the
rear by turning both leveling legs to the left. It
may take several more turns, and be sure to
turn both leveling legs the same amount.
Door Alignment (Standard Door
Model)
Both the left and right fridge doors have an
adjustable nut, located on the bottom hinge, to
raise and lower them to align properly.
If the space between the doors is uneven even
after the door bins are filled, follow the instructions
below to align the doors evenly:
Use the spanner (included with the owner's
manual) to turn the nut in the door hinge to adjust
the height. Turn the nut to the right to raise the
door or to the left to lower it.
Door Alignment (Door-in-Door
Model)
Left Fridge Door
The left fridge door has an adjustable nut, located
on the bottom hinge, to raise and lower the door
for proper alignment.
If the space between the doors is uneven, follow
the instructions below to align the left door:
Use the wrench (included with the owner's manual)
to turn the nut in the door hinge to adjust the
height. Turn the nut to the right to raise the door or
to the left to lower it.
Right Fridge Door
The right fridge door does not have an adjustable
nut.
If the space between the doors is uneven, follow
the instructions below to align the right door:
INSTALLATION 19 EN