Roland FP-10 Reference Manual page 9

Saving the Settings (Memory Backup)
When this unit's power is turned off, it will return to its default
settings. However, if desired, you can save the following settings
so that they will be remembered even after the power is off. This is
called the "Memory Backup" function.
Settings saved by Memory Backup
Metronome (Volume)
Ambience
Brilliance
Key Touch
Master Tuning
Hearing sound from the built-in speakers and the
external speakers
1.
Hold down the [FUNCTION] button and press the
[VOLUME] (right) button.
1
2
Hold down
2.
To save the setting, press the [VOLUME] (right)
button.
To cancel, press the [VOLUME] (left) button or the [FUNCTION]
button.
VOLUME indicator status
Unlit Lit
Page
p. 5
p. 6
p. 6
p. 7
p. 7
p. 8
Blinking
Restoring the Factory Settings
(Factory Reset)
The settings you've changed in the function mode can be restored to
their factory-set condition.
NOTE
When you execute a factory reset, all settings will be
initialized.
1.
Power-off the FP-10.
2.
While holding down the [VOLUME] (right) button
and the [FUNCTION] button, press the [ L ] (power)
button, and continue holding down the [VOLUME]
(right) button and the [FUNCTION] button.
Power on
2
1
Hold down
3.
When the VOLUME indicators show as follows,
release the [VOLUME] (right) button and the
[FUNCTION] button.
4.
To execute the factory reset, press the [VOLUME]
(right) button.
To cancel, press the [VOLUME] (left) button or the [FUNCTION]
button.
While the factory reset is being executed, the VOLUME indicators
show as follows. Do not turn off the power in this state.
When the factory reset is completed, the indicators show as
follows.
5.
Turn the power off, then on again.
Making Settings on the FP-10
Hold down
9