Introduction; About The Ft-B100 Series Cordless Powerpaks; General Specifications - PCC FTI PowerPak FT-B100 Series Operation, Maintenance, And Repair Manual

S 1.0: I
ECTION NTRODUCTION
This instruction manual contains information on the operation and maintenance of the FT-B100 Series Cordless
Hydraulic PowerPaks. To obtain optimum performance and many years of trouble-free service, operate the
PowerPak properly and follow maintenance procedures carefully. The key to trouble-free operation is maintaining
a clean air supply and clean hydraulic oil. Before operating the PowerPak, read this manual and retain it for
future reference.
1.1

ABOUT THE FT-B100 SERIES CORDLESS POWERPAKS

The FT-B100 Series A PowerPak is the hydraulic pump that best supports the FTI Rail Tec system of tooling.
It is used to operate the FTI RailTec family of puller units.
The FT-B100 contains a battery operated hydraulic pump that generates up to 10,000 ± 500 psi (689.5 ± 34.5
bar) hydraulic pressure.
1.2

GENERAL SPECIFICATIONS

Dimensions: ...................................................... 24.5 x 16.3 x 14 inches (64.3 cm x 41.4 cm x 35.6 cm)
Weight: ............................................................. 65.5lbs. - 29.7 Kg
Operating Hydraulic Pressure: ......................... 10,000 psi maximum
Operating Temperature Range ......................... 40°F to 120°F (4.4°C to 48.8°C)
Hydraulic Fluid Capacity: ................................ 1.75 US gallons 6.6 L
Hydraulic Fluid Characteristics: ....................... Enerpac HF
Viscosity Index: ......................................... 100 minimum
Viscosity: ................................................... 48 SUS at 210F, 215 SUS at 100F
Specific Gravity at 60F: ........................... 0.88
Flash Point, degrees: .................................. 400F
Fire Point, degrees: .................................... 430F
Pour Point, degrees: ................................... -30F
Aniline Point, degrees: ..................................... 210F/220F
Paraffinic Base Color: ...................................... ASTM 2.0
Suitable Substitutes for Hydraulic Fluid: ......... Power Team Hydraulic Oil #9637; or
Fatigue Technology 401 Andover Park East
830959-REV A
U.S. MIL-SPEC #5606;
FTI Part Number 1045-154; Aeroshell 41; ASTM 215
Seattle, WA • USA 98188-7605
MIL-PRF-83282;
or meets ISO 46:
Tel: (206)246-2010 Fax: (206)244-9886
1