Table of Contents
Advertisement
S
4.0: O
ECTION
PERATING
4.1
INTRODUCTION, HYDRAULIC POWERPAK SETUP PROCEDURE AND OPERATION
The FTI-B100 combines the high performance of an electric AC-powered pump with the convenience of a
cordless, battery powered pump. It is ideal solution for remote locations, where electrical or pneumatic power
sources are not available.
Major features include a brushless DC electric motor, three-stage pump element and 1.75 gallon [6.6 liter]
hydraulic reservoir.
The pump is powered by a rechargeable 82V lithium-ion battery, manufactured by Briggs & Stratton
Corporation. The lithium-ion battery is capable of providing impressive run time, even under extreme job site
conditions.
4.1.1
Additional Information - Battery Charger
The Briggs & Stratton logo is trademarked and intellectual property of Briggs & Stratton.
Portions of this publication are subjected to copyright of Briggs & Stratton Corporation and Enerpac
Corporation.
4.1.2
Conformance to National and International Standards
FTI declares that the FT-B100 series cordless electric pump has been tested and conforms to applicable
standards and is approved to carry the CE, TUV C and US certification marks. An EU Declarations of
conformity is enclosed separately. Note: battery and battery charger may be CE certified depending on model
ordered, see Table 3.1-1.
4.1.3
Electromagnetic Compatibility (EMC)
The FT-B100 Series cordless electric pump has been tested and certified to conform to CE-EMC emission
and immunity standards.
Fatigue Technology
401 Andover Park East
830959-REV A
I
NSTRUCTIONS
Figure 4.1-1
Battery and Charger
Seattle, WA • USA 98188-7605
Tel: (206)246-2010
Fax: (206)244-9886
10
Advertisement
Table of Contents
