Table of Contents
Advertisement
10. Use caution when operating the PowerPak near electric power sources. The PowerPak is not generally
insulated for coming into contact with electric power sources.
11. Do not use in potentially explosive atmospheres.
12. Two ISO safety labels have been placed on machinery to alert the operator of certain precautions
that must be met to ensure proper and safe operation of the machinery. These safety labels and
their definitions are shown in Figure 3.3.2.
Notes:
a.
Safety labels are not shown actual size. Actual size is Ø0.75 inch (Ø19.05 mm).
b.
Actual colors on the safety labels are a white image on a blue background.
13. DO NOT exceed the psi hydraulic pressure rating noted on the pump nameplate or tamper with the
internal high relief valve. Creating pressures beyond rated capacities may result in personal injury.
14. Before operating the pump, tighten all hose connections.
Connections need only be tightened securely and leak-free. Overtightening may cause premature thread
failure, or cause high-pressure fittings to split at pressures lower than their rated capacities.
15. Periodically pump clean oil through the entire length of hose, then pressurize the hose and check for leaks
at the crimped connectors, between the hose material and the fitting, and between the fitting and coupler.
16. Before replenishing the oil level, retract all cylinders to prevent overfilling the pump reservoir. An
overfill may cause personal injury due to excess reservoir pressure created when cylinders are retracted.
17. DO NOT use the hose to move attached equipment. Stress may damage the hose and cause personal
injury.
18. Pump should be placed on a level surface when operated.
19. Pump should not be moved during operation.
Fatigue Technology
401 Andover Park East
830959-REV A
Figure 3.3-2
Safety Labels
Seattle, WA • USA 98188-7605
Do not overtighten the connections.
Tel: (206)246-2010
Fax: (206)244-9886
9
Advertisement
Table of Contents
