Page 2
“Cu” (fig. 2). The LUX series includes special versions with slowdown in the closing If there is too large a difference between “a” and “b”, the leaf will not travel phase (LUX R) while the LUX FC series is especially suited to areas prone smoothly and the pushing or pulling force will fluctuate during its stroke.
Page 3
nut “D” until the power cable is clamped. 12) CHECKING THE AUTOMATION N.B. The board “B” can be fitted onto both the right and left of the base “F”, Before considering the automation completely operational, the following as required (see picture). checks must be made with great care: The bottom of board “B”...
Need help?
Do you have a question about the LUX Series and is the answer not in the manual?
Questions and answers