Reef Factory Thermo control Manual page 4

Step two - set up the device parameters, i.e.:
- temperature unit (Celsius or Fahrenheit),
- temperature range suitable for your aquarium (to do so, drag the orange dots and place
them on the temperature scale),
- temperature levels above or below which the device should notify you about dangerously
low or high temperature in the tank (to do so, drag the red dots and place them on the
temperature scale).
The temperature is measured by the temperature sensor. When the temperature exceeds the
specified range (falls below 24°C or rises above 26°C by default - these values are marked in
orange in the picture below), the device will power up the heating system circuit (when the
temperature is too low) or cooling system circuit (when the temperature is too high). When the
temperature reaches dangerous levels (falls below 23°C or rises above 27°C by default - these
values are marked in red in the picture below), Thermo control will additionally inform you in such
an event by generating a sound alert, which can be switched off by changing the device setup at
any time. If you connect the device to Smart Reef system, you will additionally receive automatic
emails or text messages to your email address or phone number.
Thermo control device manual 4/12