Reef Factory Thermo control Manual page 10

Check the designations of the sockets and be careful not to confuse them. A mistake
made at this stage may cause irreversible damage to your aquarium (the device will
cool the water down instead of heating it up and vice versa). The maximum power of
the heating or cooling device must not exceed 1000 W.
Cooling circuit power supply Heating circuit power supply
8. Resetting the device
If your device does not work properly, or you want to repeat the setup procedure, or you
cannot connect to it despite several attempts, you may restore it to its default settings by
placing a magnet (included in the package) on the top part of its housing (near the light bar).
Tip: move the magnet from left to right along the light bar, to make it possible for the device
to detect its presence. The device will signal the resetting process on its display and will
start counting down from 5 to 1. When the device is reset, it emits a sound signal.
Thermo control device manual 10/12